manualshive.com logo in svg

HYT TM-628H, Руководство пользователя, Страница: 25 / 34

Поделиться
Скачать
HYT TM-628H Скачать руководство пользователя страница 25

 23

3.  Speak into the microphone after 

PTT

 is held down, the PA process initiates, and the LCD 

displays PA ON. When the PA process initiates in PA mode, you can adjust the volume via the 

volume control knob.   

4. Release 

the 

PTT

 key to end the PA process, then the radio returns to the PA mode, and the LCD 

displays PA. 

 Note:

 When the PA system is operating, the optional PA accessories and external speaker must 

be installed by your dealer. 

 

Home Channel 

Press the programmed 

Home Channel

 key, and the radio will promptly go to the programmed home 

channel. 

When dual home channels are set, press the programmed 

Home Channel

 key to promptly go to Home 

Channel 1, press again to promptly go to Home Channel 2, and press for the third time to return to the 

original channel. 

 

Rental 

Display Format:   

Press the 

Rental 

key (programmable function key), and the LCD will display the remaining rental time by 

2 time units such as “13D    21H”. The LCD will display the hour and minute such as “14H    30M” if the 

remaining time is less than one day, or the minutes only such as “30MIN “ if less than an hour. 

Auto Reminder:   

1.  Remind you of the remaining rental time every time the radio is powered on (last for 5 seconds).   

2.  Remind you every 20 minutes if the remaining rental time is less than one hour. (with displayed 

remaining rental time and beeps for 5 seconds) 

3.  Remain the Remind status during the last minute of the rental time (with displayed EXPIRING 

and beeps).   

4.  An alert tone will be heard during the last minute of the rental time. Once the time expires, the 

LCD displays EXPIRED, then the radio will be disabled to transmit or receive with an invalid 

keypad.  

 

Содержание TM-628H



































Отзывы:

Нет отзывов