HyQuest Solutions HyQual, Руководство пользователя

Страница: 2 / 23

Table of Contents
1.1 Required Accessories/Options 5
2.1 General Safety Instructions 6
2.2 Specific Safety Instructions 7
4.1 Protection for unattended logging8
4.2 Operating limits 8
5.1 SNAPSHOT, AUTOSNAP, and LOGGING 8
5.1.1 Using Snapshot and Autosnap 9
5.1.2 LOGGING 9
5.2 Set Barometric Pressure 9
5.3 Set Time and Date 10
6.1 Sensor Warm Up 10
6.2 Four Basic Deployment Methods 10
6.2.1 Manual Data Collection 10
6.2.2 Unattended Logging 10
6.2.3 Telemetry Relay 11
6.2.4 On-Line Monitoring 12
7.1 When to proceed to maintenance? 12
7.2 Maintenance – 1: Keep your device clean 12
7.3 Maintenance – 1: Calibration 13
7.3.1 Basics of Parameter Calibration 13
7.3.2 Sensor Response Factor (SRF) 14
7.3.3 Choosing Calibration Standards 14
7.3.4 Calibration Record (Cal Log) 15
7.3.5 Temperature 15
7.3.6 Dissolved Oxygen 15
7.3.7 Conductivity 17
7.3.8 pH 17
7.3.9 Reference Electrode 18
7.3.10 ORP 18
7.3.11 Depth and Vented Depth 19
7.3.12 Turbidity 19
8.1 Use Status LED for Troubleshooting 20
8.2 Check active Components 21