manualshive.com logo in svg

Hypertherm powermax65, Руководство оператора

Поделиться
Скачать
Hypertherm powermax65 Скачать руководство пользователя страница 116

OperatiOn

4-16 

powermax

65/85

 Operator Manual

Pierce a workpiece

1.  With the work clamp attached to the workpiece, hold the torch 

at an approximate 30° angle to the workpiece with the torch 

tip within 1/16 inch (1.5 mm) of the workpiece before firing the 

torch.

2.  Fire the torch while still at an angle to the workpiece. Slowly 

rotate the torch to a perpendicular (90°) position.

3.  Hold the torch in place while continuing to press the trigger. 

When sparks exit below the workpiece, the arc has pierced the 

material.

4.  When the pierce is complete, drag the nozzle lightly along the 

workpiece to proceed with the cut.

WARNING

SPARKS AND HOT METAL CAN INJURE EYES AND BURN SKIN. When firing the 

torch at an angle, sparks and hot metal will spray out from the nozzle. Point the 

torch away from yourself and others.

Содержание powermax65























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды