manualshive.com logo in svg

Hypertherm powermax65, Руководство оператора

Поделиться
Скачать
Hypertherm powermax65 Скачать руководство пользователя страница 114

OperatiOn

4-14 

powermax

65/85

 Operator Manual

Hand torch cutting hints

•  Drag the torch tip lightly along the workpiece to maintain a steady cut.
•  While cutting, make sure that sparks exit from the bottom of the workpiece. The sparks should lag slightly 

behind the torch as you cut (15° — 30° angle from vertical).

•  If sparks spray up from the workpiece, move the torch more slowly, or set the output current higher.

•  If you fire the torch unnecessarily, you will shorten the life of the 

nozzle and electrode.

•  Pulling, or dragging, the torch along the cut is easier than pushing it.
•  For straight-line cuts, use a straight edge as a guide. To cut circles, use a template or a radius cutter 

attachment (a circle cutting guide). See the 

Parts

 section for part numbers for the Hypertherm plasma cutting 

guides for cutting circles and making bevel cuts.

•  With either the 75-degree or 15-degree hand torch, hold the torch 

nozzle perpendicular to the workpiece so that the nozzle is at a 90° 

angle to the cutting surface. Observe the cutting arc as the torch 

cuts.

90°

Содержание powermax65























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды