Hyperion EOS 0840i, Руководство пользователя

Страница: 16 / 34

· 14 Hyperion EOS 0840i
OPERATING PROGRAM
8. Program Stop
9. Charge Complete
Press the STOP button to stop the charging process.
When the charging process is finished an audible sound will be heard.
Charging Program
The different types of charging supported.
NiMH
NiCd
RE-PEAK
CYCLE
Pb
Batt
Type Operation
Program
Description
For charging LiPo/LiFe/LiIon/HvLi without balancing. (Not recommended)
This program is for charging or discharging lithium battery which will
not be used for a long time.
The battery will be charged to only approx.90% of full-rated capacity.
Thus, the amount of time to charge the battery will be reduced.
This mode is for balancing the voltage of lithium-polymer battery cells
while charging. (Recommended for Charging)
For harging NiMH and NiCd batteries using the charge current set by
the user.
In this program the charger detects the condition of the battery which
is connected to the output and automatically charges the battery.
Note: you should set up the upper limit of the charge current to
avoid damage by excessive input current. Some batteries have
low resistance therefore can lead too high input current.
Re-peak mode is used to charge a NiCd/NiMh battery up to three times
in a row automatically. This is to ensure that the battery is fully-charged
and ready for use.
Cycles the battery up to 5 times automatically. This is to analyze
batteries health or to help with the “Breaking-in” process. Charge ->
Discharge and Discharge -> Charge is programmable.
LiPo
Lilon
LiFe
HvLi
CHARGE
REGENERATIVE
DISCHARGE*
STORAGE
FAST CHG
BAL CHARGE
CHARGE
AUTO CHG
DISCHARGE
CHARGE
DISCHARGE
This mode is for discharging LiPo/LiFe/LiIon/HvLi battery when the
power source is Lead Acid battery.
This mode is for discharging NiMH/NiCd battery.
This mode is for charging Pb battery.
This mode is for discharging Pb battery.
PORT CHARGE
PORT STORAGE
This mode is to be used with small batteries that do not have a main
connector and that only offer a balance plug for charging only.
This mode is to be used to store small batteries that do not have a main
connector and that only offer a balance plug for discharging only.
.
DISCHARGE This mode is for discharging LiPo/LiFe/LiIon/HvLi battery.
REGENERATIVE
DISCHARGE* This mode is for discharging NiMH/NiCd battery when the power
source is a Lead Acid battery.
REGENERATIVE
DISCHARGE* This mode is for discharging Pb battery when the power source is
Lead Acid battery.