Hyperion EOS 0840i, Руководство пользователя

Страница: 8 / 34

- A battery pack which consists of different types of cells (including different
- manufacturers)
- Non-rechargeable batteries such as Alkaline (Explosion hazard).
- Batteries that require a different charging technique that differ from NiCd, NiMh,
LiPo or Gel cell (Pb, Lead acid).
- A faulty or damaged battery.
- A battery fitted with an integral charge circuit or a protection circuit.
- Batteries installed in a device or which are electrically linked to other components.
Please bear in mind the following points before commencing charging:
- Did you select the appropriate program suitable for the type of battery you are
charging?
- Did you set up adequate current for charging or discharging?
- Have you checked the battery voltage? Lithium battery packs can be wired in
parallel and in series, i.e. a 2 cell pack can be 3.7V (in parallel) or 7.4V (in series).
- Have you checked that all connections are firm and secure?
- Make sure there are no intermittent contacts at any point in the circuit.
Charging
Do not overcharge your battery by surpassing the manufactures recommend
maximum allowed charging C rate. If you charge too quickly this will cause the cell to
become damaged or catch fire.
Connect the battery to the terminal of the charger: red is the positive terminal and
black is the negative terminal. Due to possible differences in resistance of the
connectors and wires only use high-quality charge cables and charge harnesses
failure to do so may cause the charger to not function properly and may cause
damage.
Always refer to the battery manufacturers charge label about the charging method,
maximum charge rate and other important settings. Failure to incorrectly charge your
battery may result in fire or explosion.
Never attempt to charge or discharge the following types of batteries:
WARNING AND SAFETY NOTES
· 06 Hyperion EOS 0840i