Hyperion EOS 0840i, Руководство пользователя

Страница: 19 / 34

17 · Hyperion EOS 0840i
SYSTEM SETTINGS
Safety Timer
ON 120Min
Rest Time
CHG>DCHG 10Min
Capacity Cut-Off
ON 5000mAH
“Capacity Cutt-off allows the user to set the
maximum charge capacity that will be
supplied to the battery during charging. If
the delta peak voltage is not detected nor
the safety timer expires by any reason then
this feature will automatically stop the
process at the selected capacity value.
When you start charging the timer will start
to run. This safety timer is used so that the
battery does not accidently continue to
charge for too long periods of time. This
safety feature is to prevent overcharge in
the event that the battery is faulty. Do note
to give yourself plenty of time to fully
c h a r g e t h e b a t t e r y u n d e r n o r m a l
circumstances.
OFF/
ON
(
100-50000 mAh)
When using your EOS 0840i Charger for the first time it is essential to set your user-
defined settings that are relative for you and your batteries. Select the System Settings
menu to alter and program the charger for your use.
Navigate through the menus by using the + or - button, by pressing the START/ENTER
button it will save your settings.
ITEM SELECTION DESCRIPTION
OFF/
ON
(
1-720 Min )
1-60Min
The rest time allowed between the charging
and discharging cycles.
Key Beep ON
Buzzer ON
OFF/ON
Choose ON/OFF for the audible alarms and
button key pressing. You may choose
between “beeps” or “melodies” for alarming
the user if there is error or warnings.
Power Source?
DC Power Supply
DC Power Supply/
Battery
Choose the power source; either DC Power
supply or Lead Acid PB Battery.