Hyperion EOS 0840i, Руководство пользователя

Страница: 15 / 34

13 · Hyperion EOS 0840i
OPERATING PROGRAM
R:3SER S:3SER
CONFIRM(ENTER)
LP4s 1.5A 12.14V
BAL 000:50 00022
7. Charging Status Monitor
R shows the number of cells detected by the charger and S is the
number of cells set by you at the previous screen. If both numbers
are identical, press START/ENTER to start charging process.
During charge process, real-time status will be showed as left screen.
REAL-TIME INFORMATION WHILE CHARGING
Press INC or DEC during charging or discharging process and the real-time charger data
will appear.
LP4s 1.5A 12.14V
BAL 000:50 00022
4.07 4.06 4.11 V
0.00 0.00 0.00 V
Fuel= 90%
Cell= 4.10V
INC
INC
LP4s 1.5A 12.14V
BAL 000:50 00022
Ext. Temp ----
Int. Temp 37 C
DEC
Temp Cut-Off
50 C
DEC
Final voltage when the program ends.
Input voltage.
Safety timer ON and duration of time in minutes.
Capacity cut-off ON/OFF and the preset capacity.
Voltage of each cell in the battery pack when the battery is
connected with balance lead.
Internal temperature.
Temperature probe is needed to show external temperature.
Charged capacity percentage and average cell voltage of the
battery pack.
Real-time status: battery type, battery cell, charge current, battery
voltage, elapsed time and charged capacity
Cut off temperature
START/ENTER
DEC
DEC
DEC
DEC