HygroMatik MiniSteam MSE05, Руководство пользователя

Страница: 26 / 40

Page 26
10.3 Removal and reinstallation
of the steam cylinder
Risk of eye injuries!
The clips that fix the steam cylinder halves
have sharp edges and can jump off during
dismantling.
Eye injuries are possible.
Wear proper PPE (Personal Protection Equip-
ment)!
Steam cylinder removal
» Remove unit housing cover
» Remove clamp (23) from piece of
tube (3) on steam cylinder side.
» Disconnect electrode plugs (4) and
sensor electrode plug (10).
.
&$87,21
Set control
switch to „II“ po-
sition for residual
water draining
When cylinder is empty, set
control switch to „0“ position
Disconnect unit from power supply
Verify safe isolation
Current clamp
Disconnect from water
supply
Wait 10 mins. Then check cy-
linder temperature by cautious
approximation with hand (do
not touch!)