HygroMatik MiniSteam MSE05, Руководство пользователя

Страница: 19 / 40

Page 19
8. Electrical connection
Danger of electrical shock!
Dangerous electrical voltage!
All work relating to the electrical installation
may only be carried out by designated spe-
cialist personnel (electrician or qualified per-
son with equivalent training).
The customer is responsible for monitoring
the qualifications of the specialist personnel.
Do not connect the steam humidifier to the
live power supply before all installation work
has been completed.
General installation rules
• All local rules concerning the imple-
mentation of electrical installations
must be obeyed
• Electric connector cables to be laid pro-
fessionally
• Install the electrical connections accor-
ding to the wiring diagram
Possible electronical components de-
struction through electrostatical dischar-
ge!
Prior to commencing electrical installation
work, steps must be taken to guard the sen-
sitive electronical components of the unit con-
trol against damage from electrostatical
discharge.
8.1 Electrical installation
approach
» Provide fuses with a contact gap of
at least 3 mm (.12 inch) per pole.
» Install a separate main connection
for each steam cylinder including
main circuit breaker, main switch
etc. .
» Make main connection according to
the table below.
Main connection
For the MiniSteam humidifiers, main connec-
tion is to be implemented as follows:
Other operating voltages on request.
Fusing
HygroMatik recommends the use of slow
blowing up to middle time-lag main fuses
(only applies to the a.m. mains supply volt-
ages).
Steam humidifier installations should encor-
porate an individual resiliant current circuit
breaker.
:$51,1*
3OHDVHQRWH
127,&( 127,&(
Model Main connection
MSE05 220 - 240 VAC/1~/
50-60 Hz
MSE05
MSE10 380-415VAC/3/N/
50-60Hz
3OHDVHQRWH