HygroMatik CU-1, Руководство пользователя

Страница: 27 / 56

Page 27
5. Installation
I n order to install your HygroMatik nozzle system safely and
properly, please first read these operating instructions.
Warning: Installation of this nozzle system to be attempted only
by qualified personnel (plumber, electrician). We accept no liabi-
lity for damage due to faulty installation.
Please consult and obey all local regulations and guidelines con-
cerning electrical, compressed air and plumbing installation.
The instructions and regulations in this section regarding place-
ment of system components and installation must be noted and
followed under any circumstances!
Attaching or installing additional components with the nozzle
system is permitted only with the written consent of the manuf-
acturer. Without this consent the warranty is void.
5.1 General Installation Instructions
During planning of nozzle system installation, a rough layout for
placement of system components is typically prepared. Before
installation, check this for compliance with the following installa-
tion instructions.
Note: In all cases, the following general instructions for place-
ment must be noted and followed:
•
The construction (wall, pillar, ceiling, etc.) on which
system components will be mounted must support
loads satisfactorily and be appropriate for mounting.
.
•
The atomisation nozzles must be placed and
mounted to allow free dispersion of the mist.
Obstructions in the spray cone area can lead to con-
densation of the mist