HygroMatik CU-1, Руководство пользователя

Страница: 31 / 56

Page 31
5.2.2 Hygrostat
Warning: Do not install the hygrostat or sensor near an intake
(door, window), on an outer wall, over a heater, or above another
heat source. Avoid direct exposure to sunlight.
Warning: To prevent excessive humidification due to hygrostat
malfunction, install a max hygrostat.
•
Install the hygrostat where desired humidity levels
must be reached (e.g. at a height of 2m).
•
Do not place the hygrostat where it is exposed to
aggressive air.
•
In addition, follow the guidelines in the separate
hygrostat operating instructions.
Room hygrostat for control unit type Cu1
•
Secure the hygrostat to the wall using the two
appropriate screws.
Note: See Section Electrical Installation for electrical wiring of
the control unit and hygrostat.