Page 44
9.3
Cleaning and Maintenance
*The frequency of cleaning may have to be adjusted depending
on the quality of the compressed air and water used for opera-
tion.
9.4
Cleaning the Vacuum Nozzle
Warning:
Do not use abrasive cleaners, solvents or concentra-
ted acids!
Warning:
Do not unscrew the nozzle tip (3) from the nozzle!
»
Shut off the atomisation system as specified in Section
5.3.
»
Unscrew nozzle cap (1).
»
With a soft, lint free cloth, rub clean the inside and out-
side of the nozzle cap. Clear deposits from the hole of
Cycle
Task
monthly*
·
Clean the vacuum valve as specified in
Section 7.4; check water filter, clean and
replace flter cartridge if necessary
semiannually
·
"Visually check and test all electrical and
pneumatic components
Location
Designation
1
nozzle cap
2
o-ring
3
nozzle tip
4
nozzle body
5
nozzle cover
Содержание CU-1
