SPA
Page 9
2.2.3
Unit operation
Risk of scalding!
Ensure that no skin contact to hot steam can occur in the immediate
area of the steam feed.
Ensure that no condensate may drip onto human skin from the cabin
steam feed.
In case of malfunction or electrical power disruption switch off the unit
immediately and prevent from restart.
Risk of material damage!
The unit may be damaged if switched on repeatedly following a
malfunction without prior repair.
Rectify defects immediately!
The unit must not be operated on a DC power supply.
The unit may only be used connected to a steam pipe that safely trans-
ports the steam.
In case of leaking or defective components hot steam may exit in an
uncontrolled manner.
Regularly check that all safety and monitoring devices are functioning
normally. Do not remove or disable safety devices.
To avoid uncontrolled steam production due to an open steam bath
door, we recommend using a door contact switch, which shuts off the
steam generator via the safety chain after exceeding a certain period of
time (with door open).
Make sure that no ignitable gas mixture can get into the steam cylinder.
2.2.4
Mounting, dismantling, maintenance and repair
of the unit
The HygroMatik steam humidifier is IP20 protected. Make sure that the
unit is not object to dripping water in the mounting location.
When installation is made in a room without a drain, safety precautions
must be taken in order for to shut off the humidifier‘s water supply in
event of a leak.
