MultiSystem 5060
Operating Instructions Manual
© Hydrotechnik GmbH • All rights reserved
Rev. 1.8/120307EN
Page 19 of 55
6 Operation
software
The software will be explained chronologically on the following pages.
6.1
Display of the measured values
After switching on and initialisation, the currently measured values are
displayed. You can select in the display menu, which channels shall
be displayed here.
You can choose from two different displays of the measured values:
•
measured values together with minimum and maximum values
(MinMax)
•
measured values together with their units
6.1.1
Measured values with MinMax
To the right of each current measured value, the measured minimum
(upper left value) and maximum value are displayed.
MEAS.V switches to display of measured values with their units
DELETE resets the displayed minimum and maximum values
HOLD
"freezes" the display; new measured values won't be
displayed; the word "HOLD" flashes; press F5 again to
display the current values.
6.1.2
Measured values with their units
Rechts neben jeder Messwertanzeige wird die Maßeinheit angezeigt.
MINMAX switches to the display of measured values with Min-
Max
HALT
"freezes" the display; new measured values won't be
displayed; the word "HOLD" flashes; press F5 again to
display the current values.
Hint
After pressing
HOLD, you can print out the contents of the
screen by pressing
PRINT. A printer must be connected and
available to use this function.
6.2 Menu
opens the menu; all functions of the MS 5060 are con-
trolled starting here
6.2.1 Available
submenus
Channels
configuration of measuring channels
Display
settings of the measured values display
Memory
configuration of several memory parameters
Device
basic configurations of the instrument
Projects
management of complete sets of device settings
Special Applications functions for the operation of optional features
(e.g. CAN, automatic test sequences, particle
counter, load valve, …)
Press to select the desired submenu and then press
.