MultiSystem 5060
Operating Instructions Manual
© Hydrotechnik GmbH • All rights reserved
Rev. 1.8/120307EN
Page 18 of 55
5.9
Print measurement data
Note
Before you can print measurement data, a printer must be con-
nected and set.
Open presentation menu:
Select series of measurement:
Select presentation type (output):
Select channels:
Select size:
at size "Clipping":
enter time limits "From" and "To"
Start printing:
5.10 Reset
instrument
Important
All user-defined parameters and settings (channels, display, mem-
ory, a.s.o.) will be deleted by resetting the instrument. All data on
the SD card remain unaffected (measured values, sensor and CAN
database, projects, test runs, databases from test runs, a.s.o.).
Switch instrument off:
(> 2 sec.)
Switch instrument on:
(> 2 sec.)
Wait until the beginning of the initialisation is displayed; then
press:
Confirm resetting:
A green message window will be displayed where the data storage is
confirmed.