MultiSystem 5060
Operating Instructions Manual
© Hydrotechnik GmbH • All rights reserved
Rev. 1.8/120307EN
Page 16 of 55
Zero point
Press
to execute the automatic zero point equalization. A possible zero point deviation will be compensated
by the software.
Linearisation
If a calibration table is available for the connected sensor, you can enter it here, after selecting "YES" at the
menu item "Linearisation". Please see section 7.1 on page 44 for more information.
Help
Press
to open a context-sensitive help screen with information to channel specifications and pin assignment.
Load
Press
to load sensor parameters from the sensor data base.
Save
Press
to save the current sensor parameters in the sensor database.
5.6
Collect measuring data
Data are collected in series of measurements that can be configured
in the memory menu.
Select function:
Do selection:
Confirm selection:
Store changes:
Return to main menu:
Channels
Activate the channels where the measurement data shall be stored.
Storing time
Enter how long the measurement data shall be stored. Select the de-
sired time unit.
1
st
scan rate
Define how often the measurement data shall be stored. Select the
desired time unit.
Note
Storing time and scan rate define, how often and how long measure-
ment data shall be stored. Be aware that if you store too many meas-
urement data, the later evaluation and presentation will become more
difficult.