Hydro-Gear 310-1500, Руководство по обслуживанию и ремонту

Страница: 31 / 48

-1500/-1700 IHT 29
REF. Part Name
1 Main Housing
29 Capscrew
49 Aux. Pump Assy.
50 Screws
REF. Part Name
51 Lower Cover
55 Filter
56 Charge Manifold
144 O-Ring
Fig ure 23A. Lower Housing/Filter/Man i fold Assembly
LOWER HOUSING/FILTER/
MANIFOLD ASSEMBLY/
-1700
(AUXILIARY CHARGE
PUMP)
Refer to Figure 23A.
NOTE: Charge Pump assembly must be
removed before the following steps can
be performed. See page 26.
DISASSEMBLY
1. Remove the eleven housing screws (50) and
low er cover (51), and remove sealant.
2. Remove fi lter (55) and charge manifold
(56).
3. Remove o-ring (144).
INSPECTION
1. Inspect fi lter (55) and manifold (56), replace
if necessary.
NOTE: Filter replacement is suggested.
2. Inspect o-ring (144).
ASSEMBLY
1. Install o-ring (144) onto center section as-
sem bly (3), re fer to Figure 27.
2. Apply sealant to fi lter (55) before as sem bling
with charge manifold (56).
3. In stall fi lter (55) and charge manifold (56).
4. Dry fi t lower cover (51) on housing, using
screws (29) to align cover and manifold
(56).
5. Remove screws (29) and cover (51). Apply
sealant (79) to lip of main hous ing (1). See
Figure 30, Page 39 for sealant path.
6. Reinstall cover (51) and screws (29).
7. Secure lower cover (51) to main housing
(1) by tightening the eleven housing screws
(50), ref er ence Table 5, Page 16.