Hydac CTU 1000 Series Скачать руководство пользователя страница 13

Страница: 13 / 92

Safety Information

Improper use or use deviating from intended use

DANGER

Danger due to unanticipated use of the unit

Risk of bodily injury due to fire

►

Never operate the unit in potentially

explosive atmospheres.

►

The unit is only to be used with permissible

media.

Any use extending beyond or deviating therefrom shall not be considered

intended use. HYDAC Filter Systems GmbH will assume no liability for any

damage resulting from such use. The user alone, shall assume any and all

associated risk.
Improper use may result in hazards and/or will damage the unit. Examples of

improper use:

•

Operation with an impermissible test liquid.

•

Operation under non-approved operational conditions.

•

Operation when the safety devices are defective.

•

Modifications to the power unit made by the user or purchaser.

•

Inadequate monitoring of parts that are subject to wear and tear.

•

Improperly performed repair work.

CTU 1000 Series

en(us)

Page 13 / 92

BeWa CTU1000 3229578p en-us 2017-04-25.doc

2017-04-25

Содержание CTU 1000 Series





























































































Результаты поиска

Содержание CTU 1000 Series

Отзывы:

Похожие инструкции для CTU 1000 Series

Бренды по названию

Популярные бренды

Hydac CTU 1000 Series, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание CTU 1000 Series

Отзывы:

Похожие инструкции для CTU 1000 Series

Бренды по названию

Популярные бренды