Hydac CS 1x10-A-0-0-0-0/-000, Быстрый старт

Страница: 13 / 16

CS 13xx Menüstruktur / Menu structure / Structure de menus
PowerUp Menu
MODE Measuring mode
M1 Mode 1
M2 Mode 2
M3 Mode 3
M4 Mode 4
SINGLE Single mode
mTIME Measuring time
60
pPRTC Pump Protection
0
ADRESS Bus address
HECOM HECOM3b address
A
IP Reserved
MODBUS Reserved
FREEZE Display Freeze
OFF off
MANUAL Manual
TIMOUT Automatic
DFAULT Factory setting
CALIB Select calibration
ISoSAE ISO99/SAE
ISoNAS ISO87/NAS
CANCEL Cancel
SAVE Save changes and exit PowerUp
menu
CODE For internal use only
Measuring Menu
DSPLAY Display
ISO ISO code
NAS 2 NAS 2 µm
NAS 5 NAS 5 µm
NAS 15 NAS 15 µm
NAS 25 NAS 25 µm
NAsMAX NAS maximum
FLOW Flow range
ANaOUT Analog output
DRIVE LED current in %
TEMP C Temperature in °C
TEMP F Temperature in °F
SWtOUT Switching Output
M1 Mode 1
NO SET
M2 Mode 2
SP1 Switching point
MEAsCH Test channel
NAsMAX NAS maximum
NAS NAS class
ISO 4 ISO class 4µm
ISO 6 ISO class 6µm
ISO 14 ISO class 14µm
ISO ISO Code
TEMP Temperature
NAS 2 NAS 2 µm
NAS 5 NAS 5 µm
NAS 15 NAS 15 µm
NAS 25 NAS 25 µm
SwFNCT Switching function
BEYOND Above limit
BELOW Below limit
WITHIN Within
OUTSDE Outside
OFF off
LIMITS Limit values
LOWER Below limit
M3 Mode 3 UPPER Above limit
MEAsCH Test channel
TARGET Target cleanliness ISO ISO
M4 Mode 4 NAS NAS
MEAsCH Test channel
TARGET Target cleanliness ISO ISO
RSTART Above limit NAS NAS
CYCLE Test cycle
SINGLE Single mode 60
ANaOUT Analog output
NAsMAX NAS maximum
NAS NAS
NAS+T NAS + temperature
TEMP Temperature
HDaISO HDA+ISO
HDaSAE HDA+SAE
ISO 4 ISO class 4µm
ISO 6 ISO class 6µm
ISO 14 ISO class 14µm
ISO ISO Code
ISO+T ISO code + Temperature
NAS 2 NAS 2 µm
NAS 5 NAS 5 µm
NAS 15 NAS 15 µm
NAS 25 NAS 25 µm
CANCEL Discard changes and exit
SAVE Discard changes and exit
Seite / Page 13 / 16