Performing maintenance
Removing/Installing the hood
To remove the hood, please proceed as follows:
1. Switch off the CTM-SC at the main switch.
2. Open the control cabinet door and unscrew the two screws (22) of the
hand lever (18) using a 4mm Allen wrench
.
3. Close the control cabinet door.
4. Now, with two people (one left, one right), slide the hood (16) approx. 30
mm forward and then lift it up and off.
5. Remove the ground cable from the terminal.
6. The removal of the hood is now complete.
CTM-SC 3xxx series
en(us)
Page 43 / 56
BeWa CTM-SC 4165698b en-us 2017-05-10.docx
2017-05-10
Содержание CTM-SC 3 Series
Страница 55: ......