Performing maintenance
Setting the level sensor (B1) to the test liquid / Checking settings
There is an electronic level sensor In the CTM-SC tank (B1). So that the level
sensor works properly, it is necessary to set it up for the test liquid.
Here, the following two settings are possible:
=
G 60 Special
=
Water
(Default settings)
To change the settings, please proceed as follows:
1. Take off the hood. Details regarding this can be found in the
"Removing/Installing the hood" chapter on page 43.
2. Unplug the level sensor connector. The level sensor is now without
power.
3.
Keep the
key pressed and attach the plug to the level sensor.
4.
After approx. three seconds,
appears on the display.
5.
Keep pressing the
key until such a time that the
menu item is visible on the display.
6.
Use the
or
keys to choose between the
and
settings.
CTM-SC 3xxx series
en(us)
Page 41 / 56
BeWa CTM-SC 4165698b en-us 2017-05-10.docx
2017-05-10
Содержание CTM-SC 3 Series
Страница 55: ......