HYDAC FILTER SYSTEMS CTM-SC 3 Series, Инструкция по эксплуатации и техническому обслуживанию

Страница: 45 / 56

Locating spare parts
Locating spare parts
Use only original spare parts to ensure safe operation of the attachment.
When ordering spare parts, always indicate the unit designation (type,
material no., serial no., year of manufacture).
Designation Part no. Qty**
Key to the electro-cabinet 1
"G60 Spezial" test liquid - 30 liter container 3205511 1
Level sensor 909829 1
Boost pump 6186896 1
Recirculating pump 6186990 1
2/2 directional valve (Y1 / Y5) 6043440 2
Flow rate meter (B3) 6034250 1
Foot switch with cable including plug 3243402 1
Guide roll 680885 4
Filter element for prefilter / bypass filter 3559783 2
Hose set (replacement set) * 1
*) on request **) Quantity installed in the CTM-SC.
Taking the unit out of operation
Drain the unit completely, including all of its components, the same way as is
done before putting it into storage.
Pull out the power plug and securely fasten the hoses and power cord to the
unit.
Store the unit in a clean, dry (non-condensing) space.
Disposing of the unit
Dispose of the packaging material in an environmentally friendly manner.
After dismantling the unit and separating the various materials, dispose of the
unit in an environmentally-friendly manner.
CTM-SC 3xxx series en(us) Page 45 / 56
BeWa CTM-SC 4165698b en-us 2017-05-10.docx 2017-05-10