Hyd-Mech S-20 Series II, Руководство пользователя

Страница: 8 / 59

PG 1.5
HYDRA HYDRA HYDRA HYDRA HYDRAULIC OIL ULIC OIL ULIC OIL ULIC OIL ULIC OIL
The S-20 Series II is supplied with an "EDM" fluid in the Head cylinder. Substitutes should be an
"EDM" fluid (code 499) which is equal in viscosity to a #5 hydraulic oil.
The cylinder contains oil in a reservoir that should be topped up to the level of the filler plug. Add
oil to the cylinder only with the Head in the Head Down position. The head cylinder is a self air-bleeding
cylinder with a small port in the top plate. If excess oil is displaced from this port, the cylinder is working
normally.
CUTTING FL CUTTING FL
CUTTING FL CUTTING FL
CUTTING FLUID UID
UID UID
UID
The S20 Series ll uses a pump and reservoir to circulate the necessary cutting fluid to the blade
for maximum blade life. Your saw blade supplier will be able to provide information to the cutting fluid
products that are available for your needs.
No cutting fluid (coolant) is supplied with the machine. There are two types of coolant available:
- oil based; dilute 1:10 ratio ( one part concentrated coolant to 10 parts water)
- synthetic; dilute as recommended by manufacturer.
Head Cylinder F Head Cylinder F
Head Cylinder F Head Cylinder F
Head Cylinder Filler Plug iller Plug
iller Plug iller Plug
iller Plug