Hyd-Mech S-20 Series II Скачать руководство пользователя страница 6

Страница: 6 / 59

PG 1.3

S-20 Series II Mounted to Shipping P

S-20 Series II Mounted to Shipping Pallet

allet

WRAPPED FOR SHIPPING

The S-20 Series II is shrink-wrapped for shipping from our plant. Remove the wrapping from around

the saw. Complete the inspection for signs of damage. Undo the bolts that hold the saw to the pallet.

Retain these bolts to use for levelling. The following photo illustrates the floor mounting plates located at

the corners of the saw. The larger diameter hole is used for retaining during shipping and for use with

concrete floor anchors. The smaller diameter, threaded holes at each corner are used for levelling the

saw properly.

Lifting the S-20 Series II with a F

Lifting the S-20 Series II with a For

orkkkkklift T

lift T

lift Trrrrruc

uckkkkk

LIFTING THE S-20 SERIES II

FORKLIFT

The S-20 Series II is shipped with a shipping pallet attached to the saw. When lifting the pallet with

a forklift truck make sure that the load is firmly balanced. The following photo shows a lift truck lifting the

saw and pallet from the correct side. The pallet length dimension is 84". Minimum fork length of 72" is

recommended to safely lift the pallet.

Содержание S-20 Series II




























































Результаты поиска

Содержание S-20 Series II

Отзывы:

Бренды по названию

Популярные бренды

Hyd-Mech S-20 Series II, Руководство пользователя

Результаты поиска

Содержание S-20 Series II

Отзывы:

Бренды по названию

Популярные бренды