Hussmann Smart Exchange, Руководство по установке и эксплуатации

Страница: 8 / 70

P/N 3110238_B
U.S. & Canada 1-800-922-1919 • Mexico 01-800-890-2900 • www.hussmann.com
1-2
UL LISTING
The refrigerated modules are safety listed with
UL-471 and sanitation listed to NSF-7. The con-
trol kiosk is safety certified to UL-60950-1 &
UL-60950-22. Proper installation is required to
maintain this listing.
FEDERAL / STATE REGULATION
Locker assemblies at the time manufactured,
meet all federal and state/ provincial regulations.
Proper installation is required to ensure these
standards are maintained. A key must be used
to remove the louver panel or kiosk panel See
the serial plate.
SERIAL PLATE LOCATION
Serial plates are located for each module behind
the top panel just above the locker cabinets.
The serial plate contains information about the
specific model and its operating parameters.
A
key is needed to remove the front louvre panel to
access the serial plate.
LOCKER ASSEMBLY LOCATION
Locker assemblies are designed for temporarily
holding products in both indoor and outdoor
environments.
While locker assemblies are designed to work
in the harshest conditions, below is a list of
things to consider when choosing outdoor
placement location:
•
Exposure to sunlight
•
Exposure to strong wind currents
•
Exposure to rapid temperature changes
•
Exposure to areas inclined to flooding
PRODUCT TEMPERATURE
Product should always be maintained at proper
temperature. This means that from the time the
product is received, through receiving, transportation
and storage, the temperature of the product
must be controlled to maximize product life.
Locker assembly must operate for
24 hours before loading product.
Regularly check temperatures.
Do not break the cold chain.
Keep products in cooler or freezer
before loading into the locker assembly.
Medium temperature refrigerated modules
are designed for ONLY loading pre-chilled
products. Low temperature refrigerated
modules are designed for ONLY loading
frozen products.
A 4-inch unobstructed space between
the rear of the locker assembly and the
nearest structure must be maintained
for proper air circulation.
Figure 1-1 Serial Plate Location
QR CODE
Refrigerated modules have a QR code near the
serial plate, which is located above locker cab-
inets of each module. Once you scan the QR
code, all of the information about that the locker
assembly will be at your fingertips. Links to installa-
tion manuals and data sheets, as well as a link for
ordering replacement parts from
Hussmann’s Performance Parts Website.