Husqvarna F2303S0 Скачать руководство пользователя страница 50

Страница: 50 / 337

7 HANDLEBAR,CONTROLS

7.5

Checking throttle cable routing

Preparatory work

- Remove the air filter box cover. (

p. 95)

- Remove the seat. (

p. 99)

- Remove the right side cover. (

p. 99)

- Remove the fuel tank. (

p. 101)

Main work

- Check throttle cable routing.

Both throttle cables must be routed, side by side, on the

back of the handlebars and above the fuel tank bracket,

to the throttle valve body. Both throttle cables must be

secured behind the rubber strap of the fuel tank support.

If the throttle cable routing is not as specified:

Correct the throttle cable routing.

Finishing work

- Install the fuel tank. (

p. 102)

- Install the right side cover. (

p. 99)

- Mount the seat. (

p. 1 00)

- Install the air filter box cover. (

p. 95)

7 .6

Checkin throttle cable play

- Check the throttle grip for smooth operation.

- Move the handlebar to the straight-ahead position. Turn the

throttle grip back and forth slightly and determine the play in

throttle cable f).
I Throttle cable play

I 3 ... 5 mm (0.12 ... 0.2 in)

If the throttle cable play does not meet specifications:

- Adjust throttle cable play. (

p. 49)

- Push the cold start button in all the way.

When the throttle grip is turned forward, the cold start but

ton returns to its original position.

If the cold start button does not return to its original posi

tion:

- Adjust throttle cable play. (

p. 49)

Содержание F2303S0


















































































































































































































































































































































Результаты поиска

Содержание F2303S0

Отзывы:

Husqvarna F2303S0, Руководство по ремонту, Страница: 50 / 337

Результаты поиска

Содержание F2303S0

Отзывы: