Husqvarna F2303S0, Руководство по ремонту, Страница: 219 / 337

If deep notches are present:
-
Change the sliding plate.
ENGINE 17
-
Check guide pin 4) for looseness and wear.
If the guide pin is loose and/or worn:
-
Change the sliding plate.
-
Preassemble the shift shaft. ( 0 p. 217)
304682-10
17.4.40 Preassembling the shift shaft
304683-10
-
Check clearance
O
between the sliding plate and the shift
quadrant.
Shift shaft - play in sliding
plate/shift quadrant
0.40 ... 0.80 mm (0.0157 ...
0.0315 in)
If the measured value does not meet specifications:
-
Change the sliding plate.
-
Secure the short end of the shift shaft in the bench vise.
Guideline I
Use soft jaws.
-
Mount sliding plate
O
with the guide pin facing downward
and put the guide pin on the shift quadrant.
-
Mount pressure spring@}.
-
Slide on spring guide (D, push return spring
8,
with the
offset end facing upward, over the spring guide and lift the
offset end over abutment bolt
0.
-
Mount stop disk Q).
..
..
217