Husqvarna F2103P4, Руководство по ремонту

Страница: 86 / 343

10 EXHAUST
M00435-10
84
Main work
(FE EU/AU)
-
Remove all screws on the main silencer.
-
Take off silencer cap
O
and 0-ring @.
-
Take off outer tube
fs)
and 0-ring
C,.
-
Remove glass fiber yarn filling
0
from inner tube Q).
-
Clean the parts that need to be reinstalled and check for
damage.
-
Fit the new glass fiber yarn filling onto the inner tube.
-
Mount 0-ring
C,
onto connecting cap@.
-
Position the inner tube with the connecting cap and glass
fiber yarn filling in the outer tube.
-
Mount 0-ring @ on the silencer cap.
-
Position the silencer cap with 0-ring @ in the outer tube.
-
Mount and tighten all of the screws.
Guideline
(FE US)
Screws on the
main silencer M5 7 Nm (5.2 lbf ft)
-
Remove screws
O
of connecting cap@.
-
Remove connecting cap with the perforated pipe, 0-
ring
@),
and glass fiber yarn filling
C,.
-
Remove screws
0
and silencer cap Q) with 0-ring @.
-
Remove screws
@)
and insert
@)
together with insulat-
ing pad(!).
-
Remove the insulating pad from the insert.
-
Clean the parts that need to be reinstalled and check for
damage.
-
Mount the new insulating pad on the insert and fasten
with adhesive tape.
-
Position the insert with the insulating pad in outer
tube
a..
-
Mount and tighten screws
@).
Guideline
Screws on the
main silencer M5
-
Mount 0-ring
fs)
on the silencer cap.
7 Nm (5.2 lbf ft)
-
Fit the new glass fiber yarn filling onto the perforated
pipe.
-
Fit the connecting cap with the glass fiber yarn filling in
the outer tube.
Info
Press the glass fiber yarn filling into the outer tube
using a blunt tool.
-
Mount and tighten screws
O.