Husqvarna F2103P4, Руководство по ремонту

Страница: 51 / 343

9.7
A
9 SHOCK ABSORBER, SWINGARM
Checking the riding sag of the shock absorber
- Measure distance
6)
of rear wheel unloaded. ( ta:!! p. 48)
- With another person holding the motorcycle, the rider, wear­
ing full protective clothing, sits on the seat in a normal sitting
position (feet on footrests) and bounces up and down a few
times.
✓ The rear wheel suspension levels out.
- Another person now measures the distance between the rear
axle and the fixed point.
- Note down the value as dimension (9.
Info
The riding sag is the difference between measure­
ments
6)
and (9.
- Check the riding sag.
I
Riding sag 1100 mm (3.94 in)
If the riding sag differs from the specified measurement:
- Adjust the riding sag. (
a p. 50)
41
Adjusting the s�ring �reload of the shock absorber
Caution
Risk of injury
Parts of the shock absorber will fly off if the shock absorber is disassembled incor­
rectly.
The shock absorber is filled with highly compressed nitrogen.
- Please follow the description provided.
Info
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of
the spring.
Preparatory work
- Raise the motorcycle with a lift stand. (
� p. 12)
- Remove the right side cover.(� p. 91)
- Remove the main silencer. (
a p. 82)
- Remove the seat. (
a p. 92)
- Remove the manifold. (
a p. 79)
- Remove shock absorber.(!.;! p. 51)
- After removing the shock absorber, clean it thoroughly.
49