18.4.34 Checking the clutch
-
Check clutch push rod
O
for damage and wear.
If there is damage or wear:
-
Change the clutch push rod.
-
Place clutch push rod @} on a flat surface and check for run-out.
If there is run-out:
-
Change the clutch push rod.
-
Check spring retainer
(D
for damage and wear.
If there is damage or wear:
-
Change the spring retainer.
-
Check pretension ring
C,
for damage and wear.
If there is damage or wear:
-
Change the pretension ring.
-
Check spring washer
0
for damage and wear.
If there is damage or wear:
-
Change the spring washer.
-
Check the contact surface of pressure cap
(D
for damage and wear.
If there is damage or wear:
-
Change the pressure cap.
-
Check clutch center @ for damage and wear.
If there is damage or wear:
-
Change the clutch center.
-
Check damping rubber pieces
fD
for damage and wear.
If there is damage or wear:
-
Change the damping rubber pieces.
-
Check inner clutch hub Q) for damage and wear.
If there is damage or wear:
-
Change the inner clutch hub.
304690-10
-
Check the thrust surfaces of the clutch facing discs in clutch basket � for damage and wear.
18 ENGINE
201
Содержание F2103P4
Страница 1: ...PIONEERING SINCE 1903 REPAIR MANUAL2016 FE 250 Art no 3403024en Husqvarna MOTORCYCLES ...
Страница 2: ......
