Husqvarna 1151438-95 Скачать руководство пользователя | Manualshive

Страница: 8 / 44

background image

GENERAL SAFETY PRECAUTIONS

8 – English

your library can provide information about which training
materials and courses are available.

Work is constantly in progress to improve the design and
technology - improvements that increase your safety and
efficiency. Visit your dealer regularly to see whether you can
benefit from new features that have been introduced.

Personal protective equipment

•

Approved protective helmet

•

Hearing protection

•

Protective goggles or a visor

•

Gloves with saw protection

•

Trousers with saw protection

•

Boots with saw protection, steel toe-cap and non-slip
sole

•

Always have a first aid kit nearby.

•

Fire Extinguisher and Shovel

Generally clothes should be close-fitting without restricting
your freedom of movement.

Machine

′′′′

s safety equipment

In this section the machine’s safety features and their
function are explained. For inspection and maintenance see
instructions under the heading Checking, maintaining and
servicing chain saw safety equipment. See instructions
under the heading, What is what?, to find where these parts
are located on your machine.

The life span of the machine can be reduced and the risk of
accidents can increase if machine maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.

Chain brake and front hand guard

Your chain saw is equipped with a chain brake that is
designed to stop the chain if you get a kickback. The chain
brake reduces the risk of accidents, but only you can prevent
them.

Take care when using your saw and make sure the kickback
zone of the bar never touches any object.

•

The chain brake (A) can either be activated manually (by
your left hand) or automatically by the inertia release
mechanism.

!

WARNING! Most chain saw accidents
happen when the chain touches the
operator. You must use approved personal
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.

IMPORTANT! Sparks can come from the muffler, the bar
and chain or other sources. Always have fire extinguishing
tools available if you should need them. Help prevent forest
fires.

!

WARNING! Never use a machine with
defective safety components. Safety
equipment must be inspected and
maintained. See instructions under the
heading Checking, maintaining and
servicing chain saw safety equipment. If
your machine does not pass all the checks,
take the saw to a servicing dealer for repair.

A

«
...
6
7
8
9
10
...
»

Содержание 1151438-95













































Отзывы:

Нет отзывов

Похожие инструкции для 1151438-95

EPHT 1000 Plus SPS 250

Бренд: F.F. Group Страницы: 100

Бренд: YATO Страницы: 96

Бренд: Poulan Pro Страницы: 19

Бренд: Zenoah Страницы: 28

Бренд: Zenoah Страницы: 72

Бренд: Zenoah Страницы: 60

Бренд: EGO Страницы: 31

Бренд: NAX Страницы: 32

Бренд: Racing Страницы: 21

Бренд: Salem Master Pro Страницы: 11

Бренд: Harbor Freight Tools Страницы: 4

Бренд: Makita Страницы: 128

Бренд: Makita Страницы: 100

Бренд: Pioneer Страницы: 32

Бренд: jcb Страницы: 39

Бренд: Makita Страницы: 116

Бренд: Husqvarna Страницы: 8

Бренд: Husqvarna Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды