Husqvarna 1151438-95 Скачать руководство пользователя | Manualshive

Страница: 14 / 44

background image

GENERAL SAFETY PRECAUTIONS

14 – English

Adjustment of depth gauge setting

•

The cutting teeth should be newly sharpened before
adjusting the depth gauge setting. We recommend that
you adjust the depth gauge setting every third time you
sharpen the cutting teeth. NOTE! This recommendation
assumes that the length of the cutting teeth is not
reduced excessively.

•

You will need a flat file and a depth gauge tool. We
recommend that you use our depth gauge tool to acheive
the correct depth gauge setting and bevel for the depth
gauge.

•

Place the depth gauge tool over the chain. Detailed
information regarding the use of the depth gauge tool,
will be found on the package for the depth gauge tool.
Use the flat file to file off the tip of the depth gauge that
protrudes through the depth gauge tool. The depth
gauge setting is correct when you no longer feel
resistance as you draw the file along the depth gauge
tool.

Tensioning the chain

The more you use a chain the longer it becomes. It is
therefore important to adjust the chain regularly to take up
the slack.

Check the chain tension every time you refuel. NOTE! A new
chain has a running-in period during which you should check
the tension more frequently.

Tension the chain as tightly as possible, but not so tight that
you cannot pull it round freely by hand.

346XP TrioBrake, 353 TrioBrake

•

Loosen the bar nuts that hold the clutch cover/chain
brake. Use the combination spanner. Then tighten the
bar nuts by hand as tight as you can.

•

Raise the tip of the bar and stretch the chain by
tightening the chain tensioning screw using the
combination spanner. Tighten the chain until it does not
sag from the underside of the bar.

•

Use the combination spanner to tighten the bar nuts
while lifting the tip of the bar at the same time. Check that
you can pull the chain round freely by hand and that it
does not sag from the underside of the bar.

The position of the chain tensioning screw on our chain saws
varies from model to model. See instructions under the
heading What is what? to find out where it is on your model.

345e TrioBrake

•

Release the knob by folding it out.

•

Turn the knob anti clockwise to loosen the bar cover.

!

WARNING! A slack chain may jump off the
bar and cause serious or even fatal injury.

«
...
12
13
14
15
16
...
»

Содержание 1151438-95













































Отзывы:

Нет отзывов

Похожие инструкции для 1151438-95

Бренд: Hyundai Страницы: 32

Бренд: Palmera Страницы: 25

Бренд: Hyundai power products Страницы: 28

Бренд: Texas Equipment Страницы: 26

Бренд: Echo Страницы: 26

Бренд: Echo Страницы: 60

Бренд: Echo Страницы: 75

Бренд: YATO Страницы: 120

Бренд: Makita Страницы: 36

Бренд: Remington Страницы: 88

Бренд: Remington Страницы: 40

Бренд: F.F. Group Страницы: 56

Бренд: Makita Страницы: 148

Бренд: Levita Страницы: 70

Бренд: GreenWorks Pro Страницы: 41

Бренд: GreenWorks Pro Страницы: 52

Бренд: GreenWorks Pro Страницы: 72

Бренд: GreenWorks Commercial Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды