10.6
Display PCB Metalwork Removal
1. Remove Display PCBs as detailed in 7.4.
2. Remove nylon washers and spacers from pillars. Remove remaining 4
retaining nuts and metal washers from metalwork.
3. The front panel metalwork can now be pushed through case moulding cut-out
and the label removed.
10.7
Refitting Display PCB Metalwork
1. With case top uppermost, place metalwork in cut-out.
2. Turn case top over, fit metal washers, earth lead (see Fig 11) and securing nuts
as shown.
3. Fit washers as Fig 11 and refit display PCBs as detailed in 7.5.
4. Check switch caps, LCDs, LEDs are flush with metalwork, fit label.
Issue: 2 DRAFT
39
Rev: a
614365
Fig 6 Front Panel Removal
