CARE
27
Removing the Shade
■
Fully raise the shade.
■
Disconnect the power source from the power cable at the back of the shade.
■
Move each lever of the installation brackets to the left to
release the shade.
➤
A flat blade screwdriver can be used to move the lever.
CAUTION:
Be very careful not to tear or damage the fabric.
➤
If the lever is inaccessible or
inoperable, lower the shade until
you can see the underside of the
bracket. Carefully reach a small
flat blade screwdriver behind the
shade to the tab on bottom of the
bracket between the screw holes.
➤
Push the tab away from the shade
and pull the headrail to release it
from the bracket.
■
Carefully pull the shade to remove it
from the brackets.
Cleaning Procedures
Sonnette
®
Cellular Roller Shades are made from anti-static, dust-resistant materials which
repel dirt and dust. The following options are available if your shade needs cleaning.
CAUTION:
Do not steam the shades.
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most
circumstances.
Vacuuming
■
Use a hand-held vacuum with low suction for more thorough dust removal.
Compressed Air
■
Use compressed air to blow dust and dirt off shades.
Move Lever to Left
Top View
Back
Front
Installation Bracket
End Cap
Tab
Underside of
Bracket
