OPERATION
26
Problem
The shade raises or lowers unevenly, the bottom rail is not level when fully
raised, or the fabric winds unevenly, or starts to rub against one end of the
headrail.
Solution
Keep the bottom rail level while raising the shade. Side-to-side movement
while raising the shade may cause fabric to skew.
Check that the window is square by measuring the diagonals.
Check that the installation brackets are level. Shim to level, if necessary.
If the headrail is level and the window is square, adjust the bottom rail
weight.
Adjusting the Bottom Rail Weight
IMPORTANT:
Only adjust the bottom rail weight if the fabric does not roll up
straight into the headrail.
First, release both weight locks. On the back of the bottom rail, insert a flat-
blade screwdriver into the slot in each weight lock and slide them away from
the weight.
Slide the weight, in 1" increments, in the direction the fabric is gathering.
Secure the weight by sliding each lock back in position next to the weight.
Test and adjust again, if necessary.
Slide Lock to
Release Weight
Weight
Weight Lock
Move Weight
Move Weight
Gathered
Fabric
Fabric Roll in Headrail
Bottom Rail
