OPERATION
17
Basic Operation
■
To wake up the remote, simply pick it up or press
■
STOP. The last group(s) selected will
be highlighted and active.
■
Press “all” or groups 1 – 6 to select specific shade(s) to move. Selected group button(s)
will light to show they are selected.
➤
Multiple group buttons may be selected at a time.
➤
To deselect a group, press the group button again. The backlight for that group button
will go out.
■
Press
▼
CLOSE to lower the selected shade(s).
■
Press
▲
OPEN to raise the selected shade(s).
■
Press
■
STOP to stop shade or vane movement anywhere along its travel.
■
While a shade is in motion, press the opposite of shade motion (
▲
OPEN or
▼
CLOSE) to
reverse direction.
■
Press
♥
FAVORITE to send selected shade(s) to your preset “favorite” position. Refer to
the
PowerView
®
Automation Remote Control Guide
on how to set a favorite position. The
default favorite position is the shade at 50% open.
Further Operation and Programming Information
PowerView
®
Pebble
®
Remote and/or PowerView Surface Remote
Operation
For information regarding operation and programming of the PowerView
®
remote, refer to
your
PowerView Automation Remote Control Guide
or to the online PowerView Step-by-Step
Guide at
hunterdouglas.com/operating-systems/motorized/powerview-motorization/
manuals.
PowerView
®
Scene Controller
For information regarding operation and programming of the PowerView
®
Scene Controller,
refer to your
PowerView Automation Scene Controller Guide
or the online PowerView
Step-by-Step Guide at
hunterdouglas.com/operating-systems/motorized/powerview-
motorization/manuals.
PowerView
®
App Operation
The PowerView Hub
®
is required for PowerView
®
App operation. For information regarding
setup and operation using the PowerView App, refer to the online
PowerView App Software
Guide
at
hunterdouglas.com/operating-systems/motorized/powerview-motorization/
manuals.
