INSTALLATION
15
Valance Installation — Outside Mount Installations Only
After the headrail is installed, determine if the returns reach the back wall. If they do not, you will
have to use the leveling brackets. Place one at each end of the valance.
■
Make sure that the headrail assembly is pulled out all the way and remains there while
installing the valance.
■
Hold the valance assembly up to the
headrail.
■
Push the edge of the dust cover into the
short valance clips.
■
Push the entire valance assembly all
the way back toward the wall.
■
The returns should meet the wall (if not,
install leveling brackets on both ends
just inside the returns). If pushing in the
valance assembly all the way causes
the valance to bow, trim the returns
using scissors.
Short
Valance
Clip
Leveling
Brackets
DualFold
™
Valance
