INSTALLATION
8
■
The valance assembly is now complete. Position the valance upright.
Crestover
™
Wood Valance (Using Dovetail Corner Clips) Assembly
■
Slide the two dovetail clips attached to the
wood valance face into the corresponding
grooves on the valance returns.
NOTE:
If the returns are too long, they can
be shortened using a cut-off saw to remove
material from the back edge. Do not cut the
miter corners to shorten the returns.
Top Insert Locks into
Valance Assembly Clip Top Tabs
Dovetail Clips
Dust Cover
Valance
Return
Wood
Face
