INSTALLATION
12
■
Set the rear of the short valance clip against the back
track of the headrail and twist them into position.
Headrail Installation
■
Center the headrail underneath the installation brackets.
■
Tilt the headrail and insert it into the front edge of the installation brackets.
■
Push back, then roll the headrail back up toward the rear of the blind.
■
Push up and snap into place.
Test the Headrail Operation
■
For a headrail with the cord and chain control system, unpack the chain and cord.
■
Check that the chain/wand will rotate the louver hooks.
■
Check that the cord/wand will traverse the louver hooks.
Attach Louvers
■
Use the safety wand on the wand assembly (or the chains on a cord and chain control
system) to rotate the louver hooks so the slot between the long and the short prong of the
carriers are facing you.
■
Push the louver into the hooks until it “snaps” into place.
Headrail Back Track
Tilt Up and
Pull Into Place
Roll Up
Installation Bracket
Louver
Hook
