Hunt HTP-T800, Руководство пользователя

Страница: 58 / 58

HTP-T800 User Manual
-57-
z
1500V isolation (input to output)
.
PoE must be protected from over-voltages exceeding the 80V maximum rated surge input
voltage
1.
Recommended Operating Conditions
Parameter Min Typ Max Units
1
DC Supply Voltage 36 48 57 V
2
DC Voltage Lockout 30 36 V
3
Operating Temperature -20 25 70
Ta/°C
2.
DC Electrical Characteristics
Parameter Min Typ Max Units
1
Nominal Output Voltage 11.5 12.0 12.5 V
2
Output Current
(V
IN
= 48V)
1.0 A
3
Line Regulation 0.1
%
4
Load Regulation 1
%
5
Output Ripple and Noise 100
mVp-p
6
Minimum Load 100
mA
7
Short-Circuit Duration
∞ sec
8
Efficiency @ 80% Load 87
%
9
Isolation Voltage (I/O) 1500
V
dc
10
Temperature Coefficient
0.02 %
Note 1: Typical figures are at 25°C with a nominal 48V supply and are for design aid only. Not Guaranteed
2: The output ripple and noise can be reduced with an external filter, see application note.
3: Continuous short circuit duration is applicable at 25'C ambient temperature in free air. At higher temperatures
or with restricted airflow (e.g. in a sealed enclosure) the duration will need to be limited to avoid overheating.