Hunt HTP-T800, Руководство пользователя

Страница: 28 / 58

HTP-T800 User Manual
-27-
„ IP Mode
Two IP modes are supported. Depending on the selected mode, further configuration items
come as follows.
IP Mode Selection Description
Local IP Fixed IP address
Local
Gateway
Gateway IP address
Fixed IP
Local Subnet Subnet mask
DHCP IP
N/A
☞ Please, get IP address information from your ISP provider or network manager.
„ DNS
Set DNS server IP address.
„ Base Port
Network base port is used for communication between systems. In order for the HTP-T800
and remote systems to be connected together, each port number must be identically set.
„ HTTP Port
HTTP port used for web-based connection
„ RTSP Port
RTSP port used for RTSP-based connection
„ SNMP
HTP-T800 can be used as an SNMP agent. It is compatible to both SNMPv1 and SNMPv2c.
Vender specific MIBs for IP camera/server are defined. SNMP listen port can be set and
disabled when it is 0. SNMP trap is also supported. Destination IP and port can be set. If one
of these values is 0, SNMP trap will be disabled.
„ Multicast IP
The multicast IP address selection range is between 224.0.1.0 and 238.255.255.255. The
selection can be used only when media protocol is set to Multicast. The multicast address
must be the same for the system to be connected using multicast protocol.
„ DDNS
Select the DDNS(Dynamic DNS) server to use. One of the two servers can be selected.