Hunt HTP-T800, Руководство пользователя, Страница: 15 / 58

HTP-T800 User Manual
-14-
3. System Operation
1. LED Display
„
Description of LEDs
System status can be monitored with LEDs.
LED State Description
Off No power
PWR
Red Power on
Green blinking Normally operating
Red System failure: Needs diagnostics
Constant change of colors
between Red and Green NTSC/PAL setting does not match with input
video signal
Red Blinking Failed to obtain IP address in DHCP mode
Constant change of colors
between Green blinking 2
times and Red blinking
once Failed to register on DDNS server
Green blinking, Red blinks
once every 5 seconds Video loss in Encoder system
STATUS
Orange blinking Improper resolution setting in duplex mode
Off No connection to remote system
Green Connected to a remote system
Red blinking Decoder only: trying to connect to an Encoder LINK
Orange Illegal connection (unsupported combination of
system modes)
Green Data transmission in progress
Red Data loss DATA
Off No data transmission
2. Remote Video Monitoring
There are two ways to view the remote video when the connections are completed between a site and
center system. In order for a proper operation, an IP address must be set accordingly. Please refer to
True Manager
or
Remote Setting in Chapter 4 and 5
for further details.
„
Video Monitoring with Decoder System
Once the encoder IP address is set in the remote IP address section of the decoder, the decoder
system will connect to the encoder system and start receiving the video images. Normally, a monitor
connected to the decoder will display video images.