Hunt HTP-T800, Руководство пользователя

Страница: 19 / 58

HTP-T800 User Manual
-18-
4. Remote Configuration
1. Remote Configuration
The server can be configured using web browser. Type IP address of HTP-T800 in the address input
area of Internet Explorer, then a live viewing screen will be displayed. Press
Setup
button located in
the upper right area of the monitoring screen, then the se page for server setup will be displayed.
The remote configuration window may be slightly different depends on the system modes (Encoder,
Decoder). The general explanation of the configuration in this manual is based on Encoder system
and differences according to the modes will be clarified when needed.
The configurations are grouped into 8 categories:
System
,
Video
,
Audio
,
Network
,
Serial
,
Event,
Preset
and
User
. Any configuration changes are not applied until
Apply
is pressed. Leaving the page
without pressing
Apply
button, changes in the page will be discarded.
2. Encoder Configuration
While most configuration items are common for Encoder, Decoder and Duplex mode, there are items
which are relevant to specific system mode. All the configuration items for Encoder mode were
explained first. Then, items specific only to Decoder and Duplex mode are described respectively.
Sections for Decoder and Duplex will not include items common for all modes.
c Enter IP Address
d Press Setup button