IMPORTANT NOTICE
The information contained herein is supplied without representation
or warranty of any kind. Humboldt MFG. CO. therefore assumes no
responsibility and shall have no liability, consequential or otherwise, of
any kind arising from the use of the described equipment contained in
this manual.
Updated products
The manufacturer reserves the right to change or modify product
design or construction without prior notice and without incurring
any obligation to make such changes and modifications on products
previously or subsequently sold.
Fitness for application
The manufacturer makes no recommendations or claims regarding
fitness for applications other than the specific tests as defined in this
User Guide.
General Warnings
Safety Warnings
Operators should take care to operate this machine under the
maximum load restrictions. The machine is programmed at the factory
to provide safety shutdown if the upper or lower maximum travel is
exceeded.
Electrical Warnings
Typically, there is no reason for the operator to open the machine.
However, if the customer’s engineers attempt to change settings to the
circuit board connected to the back panel, the machine must always be
unplugged before this operation. Unplugging the internal connection to
the back panel circuit board while the machine is under power will
result in permanent damage to the circuit board.
6
