![background image](http://html1.mh-extra.com/html/human-care/heliq/heliq_service-manual_2182734009.webp)
www.humancaregroup.com
9
7. Use the spatula again to get the end of the
belt with the small pin out.
8. Return the belt roll with the up button on
the hand control. Grab the belt.
9. Remove the pin, the belt is now loose.
10. To insert the new belt, do the steps in
reverse.
After the new belt is assembled. Make
sure to position the opto-switch to it´s
starting position!