28
28
www.humancaregroup.com
7. Remove the pin and the belt is loose.
8. If you need to remove booth belts, do the
same on the opposite side.
9. Insert the new belt/belts through the belt
outlet as shown in the picture below.
Note! Make sure the black tags on both
belts are facing each other.
Note! Make sure the belts are on the
correct side of the Belt tension guard.
• The belt should enter the belt roll through
the slot with the metal pin.
• The end of the belt should be fastened with
the metal pin in the slot next to the slot
where it entered the belt roll.
• The pin should be resting in the slot as much
as possible. Pull the belt to make the pin fit
in the slot.
