62
HUDSON OWNER’S MANUAL
Rear shackle bushings are provided
with grease fittings and these should
be lubricated with viscous chassis lu-
bricant every 1,000 miles.
Rear spring front pivot bolt bush-
ings require no lubrication.
SHOCK ABSORBERS
Direct double acting hydraulic type
shock absorbers, Fig. 53, are used at
the front and rear ends of all cars,
except Cab Pickups which are fitted
with front shock absorbers only.
The front shock absorbers are
mounted axially within the front coil
springs and are cushioned at the upper
and lower ends in rubber grommets.
The rear units, which are identical in
construction to the front units shown in
Fig. 53, except that eyes are fitted at
the upper and lower ends instead of
studs, are also cushioned in rubber. At
the upper end they are attached to the
frame cross member, while at the
lower end they are assembled to the
rear spring clip plates.
The fluid is sealed in the shock absorb-
ers and they require no further atten-
tion unless a leak should develop. In
this event the faulty unit should be
removed for repairs. As special tools
are required to service the shock ab-
sorbers, and only Hudson Shock Ab-
sorber Fluid should be used to refill
them, all shock absorber work should
be performed by your Authorized Hud-
son Dealer.
Figure 53
Содержание 1947 3/4-TON COMMERCIAL
