U-ONE
®
-SAFETY-LWL
Configuration manual
USL_KonfigManual-en_R3
9
Now, as the installation source, select the path for your installation by clicking “Search”. There,
select the
drivers
folder.
Click “Continue” to start the installation. Click “Continue” to complet
e
installation of the driver software for the USL. End the installation by clicking “Close”. The USL
can now be used.
2.2 General description of the software
This section describes how you can use the US42Pro configuration software to set the specific
device configuration for the USL.
The user interface is divided into thematic areas for ease of use.
Header:
The header contains the menu bar for basic software
operation.
Display area:
The display area is always visible, and displays the
available modules and their status
The current position, current speed, direction of rotation
and current at the analogue output (optional) are
displayed in the top area.
The modules are listed in the order they are arranged in
the control cabinet.
Configuration area:
The module configuration is entered into the tabs here.
2.2.1 Language selection
Pull-down menu: Options
Language
The language used for the US42Pro software will be selected based on the country settings for
your Windows operating system. If there is no such data set available, English will be selected
as the language. Use the “Language” menu item to change the selection.
2.2.2 Change password
Pull-down menu: Options
Change password
Use “Change password” to assign the Admin and Tester password. A closed lock in
the header
indicates that a user-specific password has been assigned.
Authorisation levels:
There are 3 authorisation levels for users. 2 of these can only be activated through password
Fig. 2-2: Driver installation
Header
Display
area
Configuration area
Fig. 2-3: Overview diagram for the
user interface
