U-ONE
®
-SAFETY-LWL
Configuration manual
8
USL_KonfigManual-en_R3
2 Software
2.1 Software installation
System requirements
:
Commonly available Windows
®
laptops/PCs with the following system requirements are used as
configuration computers:
Windows
®
7 / 8 / 8.1 / 10.
64-bit operating system
Free space on the HDD: 150MB (+ dot.net Framework).
Free USB 2.0 interface or higher.
1 GB RAM, CPU: 1GHz, screen resolution: 1024 x 768.
Ensure that there is a USB connection between the device and your laptop/PC. If the “New
hardware search assistant” starts automatically, click “Cancel” to close it.
Insert the enclosed data storage medium, or execute
Setup.exe
after downloading. Navigate to
the CD-ROM drive using the explorer, and launch
Setup.exe
there.
The setup will guide you through the installation. Please follow the instructions on the monitor.
Windows 7
Unfortunately, because support for your operating
system has run out, we will no longer be able to sign
your drivers. Therefore, you must confirm installation
manually. To do so, click “Install this driver so
ftware
anyway”. Then the setup routine will continue.
2.1.1 Manual driver installation
NOTE!
A user with administrator rights should carry out driver installation. Ensure that all
programs are closed.
If you need to install drivers manually, please use the following steps depending on your
operating system.
Connect the enclosed programming cable to the UO-SCU and your laptop/PC. Press the
“Windows key” + “Pause”
or
press “Computer” (right click) “Properties” on a desktop to access
the system properties.
There, open the device manager, which will list all connected devices. Select “JHG Dev” (right
click) “Update driver software ...”.
Fig. 2-1: Win7 drivers
